Honeywell HomMed Genesis Touch Quick Start Manual page 29

Hide thumbs Also See for HomMed Genesis Touch:

Table of Contents

2. Select Scale. The Scale screen appears:

3. On the monitor, press Start Pairing. A Bluetooth Permission Request window appears:

4. Select Yes. Messages similar to the following appear:

5. To power the A&D scale, press the Measurement Switch button (blue/gray power button on the front

side of the A&D scale). The display window on the scale should zero.

6. Step on the scale.

Note:

The A&D scale only tries to pair after a valid weight has been established on the scale. Refer

to the manufacturer's document that came with your scale for more information about

obtaining a weight.

7. When a weight appears steadily on the scale, step off the scale.

1/19/12

Setting Up Peripheral Devices

P4810EN.01

Table of Contents