Powering The Monitor - Honeywell HomMed Genesis Touch Quick Start Manual

Hide thumbs Also See for HomMed Genesis Touch:
Table of Contents

Advertisement

Powering the Monitor
The Genesis Touch Monitor is a touchscreen tablet. It can be run by batteries (recharged via AC adapter) or
through an AC adapter that plugs into an electrical outlet. To charge the batteries, plug the AC adapter into
the monitor and an electrical outlet.
To turn the monitor on:
1. Press and hold the Power button on the top side of the monitor. A screen similar to the following
appears:
Note:
The monitor should be oriented as shown above to view Genesis Touch screens correctly.
2. Place your finger on the lock icon and slide it in the direction of the arrow. The Honeywell HomMed
Genesis Touch screen appears:
3. Touch the screen. The Vitals Now screen appears:
1/19/12
©
2012 Honeywell HomMed. All rights reserved.
Understanding the Monitor
P4810EN.01
5

Advertisement

Table of Contents
loading

Table of Contents