Overview; Understanding The Monitor - Honeywell HomMed Genesis Touch Quick Start Manual

Overview
Setting up generally consists of the following, depending on the patient's individual requirements:
•

Understanding the monitor

• Setting/Verifying time
• Enabling Wi-Fi
• Setting up for video conferencing
• Setting up peripheral devices
• Pairing and positioning the scale
• Pairing a blood pressure unit
• Pairing an oximeter
• Configuring for a thermometer
• Un-pairing a peripheral device
• Setting up questions and reminders
Set up the monitor in an area where it can successfully measure vital signs and transmit results.
IMPORTANT: Many features and functions of the tablet have been disabled to allow for use as a
Genesis Touch Monitor. Refer to the tablet manufacturer's instructions for additional
information related to:
•
•
•
Understanding the Monitor
Place the monitor on the stand or on a flat, stable, and uncluttered surface where seating is available. A
location near a window on an outside wall usually works best for transmission purposes. The monitor can
be run on batteries, just as a cellular phone does, however, the preferred method is to keep it plugged in. To
charge the batteries, plug the monitor into an electrical outlet via the AC power adapter.
CAUTIONS: DO NOT use an electrical wall outlet controlled by a light switch.
CAUTIONS: DO NOT place near sources of water (e.g., sinks or bathtubs).
CAUTIONS: DO NOT place on or near a heat source (e.g., stove, fireplace, heater,
CAUTIONS: DO NOT place on top of or next to electrical equipment (e.g., television,
1/19/12
Powering off and on
Batteries
Charging
heat vent, etc.).
microwave).
©
2012 Honeywell HomMed. All rights reserved.

Overview

P4810EN.01 3