Switching Off The Alarm After Being Woken; Switching Off The Alarm - TechniSat DIGITRADIO 585 Instruction Manual

Repeat
> Here you can select from Daily (every day of the week), Once, Weekdays
(Mon - Fri) or Weekends (Sat and Sun). Press the OK button to apply the
setting.
Time
> Here you can enter the alarm time and date (if required).
First use the / buttons to select the hours and press the OK button to
accept this. Then you input the minutes. Accept this by pressing the OK
button.
If Repeat> [Once] has been selected, you must also enter the date as well as
the time.
Mode
> You then enter the source. The available options are BUZZER, Internet Radio,
DAB or FM. Press the OK button to accept the setting.
Programme
> If you have selected Internet Radio, DAB or FM, you can then enter whether
or not you want to be woken up by the last station listened to or by one
from your Favourites list.
Volume
> Use the / buttons to select the volume with which you wish to be woken
up.
Save
> Press the OK button to save the alarm.
The alarm is active as soon as you have set the alarm repeat to Daily, Once,
Weekend, or Workdays. The status bar shows an alarm symbol with the
corresponding number of the active alarm.

16.2.2 Switching off the alarm after being woken

> Push the On/Standby button to switch the alarm off.
> Press the SNOOZE button to switch on the snooze function. By repeatedly
pressing SNOOZE you can also select the length of the pause from 5, 10, 15
or 30 minutes.
The alarm symbol appears in the display again if the alarm repeat is set to
Daily, Weekend or Workdays.

16.2.3 Switching off the alarm

> Select the corresponding alarm under > Repeat: Off.
70