Switching Off The Alarm After Being Woken; Deactivating The Alarm; Equaliser - TechniSat DIGITRADIO UP 1 Instruction Manual

[Repeat] > In this case select the days on which the alarm should be active.
You can choose between daily, once, weekends (Sat. and Sun.) and working
days (Mon. - Fri.). Then press Enter.
If you have selected Once, you must then enter the date on which the alarm
should be active.
[Volume] > With the << or >> buttons, select the volume at which you wish to
be woken. Then press Enter.
> If you now wish to activate the alarm use the << or >> buttons to select On
and press Enter again. The alarm is now activated. This is shown by a symbol
in the top right-hand corner of the display.

10.2.2 Switching off the alarm after being woken

> Keep the
> Press the Enter button to switch on the snooze function (Snooze). By pressing
Enter again, you can select the length of the pause as either 5 or 10 minutes.
After the snooze time has elapsed, the wake-up tone starts again.

10.2.3 Deactivating the alarm

If you wish to deactivate the alarm, proceed with the alarm according to section
10.2.1 and, after adjusting the volume, select Alarm > Off. Press the Enter button to
save the setting. The alarm is now switched off.

10.3 Equaliser

To adapt the tone to your requirements, it is possible to adjust trebles and basses
separately.
> Keep the Info/Menu depressed and use the << or >> buttons to select the
[Equaliser] item.
> Using the << or >> buttons, either select [Trebles] or [Bass] and press Enter.
> You can set the values in the range between -5 and +5 using the << or >>
buttons. Press the Enter button to save.
22
/Mode button depressed to switch off the alarm.