Visual Displays; Menu Operation; Main Menu; Source Selection - TechniSat DIGITRADIO 585 Instruction Manual

6.4.7 Visual displays

Current source
Station name,
track, artist,
additional info,
menu, lists
Depending on the selected function/source, the visual display shown may
vary. Take note of the instructions on the display.

7 Menu operation

Menu navigation primarily takes place using the MENU, /// and OK buttons
on the remote control.
The menu is divided into the respective submenu for the currently selected source
and the main menu. To navigate in submenus, either press the OK button or
alternatively the  button.
* highlights the current selection.
You can go back one step by pressing the BACK or  button.
Close menu: press BACK or MENU multiple times or wait for approx. 15
seconds.

7.1 Main menu

The main menu takes you to all the functions and settings for the DIGITRADIO 585.
> Press the MENU button to access the main menu.
If you are currently in a playback source, you can use the MENU button to
access the submenu for this source. To reach the main menu while in the
open submenu, use the  or > Main Menu buttons to select the Main
menu item and press OK.

7.2 Source selection

> Press the MODE button as often as required until the desired source is shown
in the display.
Alternatively:
> Press the MENU button.
If you are in a submenu, select the main menu as described in Section 7.1.
Time
Status bar
57
DE
EN
FR
IT
NL
DA
PL
SK
SL