Switch Off Alarm Clock After Alarm; System Settings; Time And Date Settings; Set Time/Date Manually - TechniSat DIGITRADIO 22 Operating Instructions Manual

If you have selected DAB+ or FM, you can specify under [Prog.] whether
you want to be woken up with the last station you listened to or with one
from your favourites list.
Repetition (repeat)
You can choose between Daily (every day of the week), Once, Weekdays
>
(Mon. - Fri.) or Weekends (Sat. and Sun.). Press the OK button to accept the
setting.
Volume
Here you can adjust the alarm tone volume with the TUNE/OK rotary knob.
>
set. Press the TUNE/OK rotary knob to accept.
Prog.
> -> Only available if DAB+ or FM was selected under [Mode].
Select the last station you listened to or a station from your
>
Favourites list.
The time must be read in for the alarm clock to work properly. For more
information, see point 12.1.2.

11.3.2 Switch off alarm clock after alarm

Press the On/Standby or TIMER/ALARM button to switch off the alarm
>
clock.
If you want to activate the snooze function, press the TUNE/OK rotary
knob when the alarm clock is active.

12 System settings

All settings explained in this section apply equally to all sources.

12.1 Time and date settings

12.1.1 Set time/date manually

Depending on the time update setting (point 12.1.2), you must set the time and date
manually.
In the MENU, select [Time/date] > [Set time/date] and press the
>
TUNE/OK rotary knob.
> The first digits (day) of the date flash and can be changed by turning the
TUNE/OK rotary knob.
Press the TUNE/OK rotary knob to accept.
>
> The next digits (month) of the date then flash and can also be changed as
described above.
Press the TUNE/OK rotary knob after each further setting to return to the
>
23