Dab Radio Reception; Performing A Station Scan; Manual Scan; Selecting Stations - TechniSat DIGITRADIO 585 Instruction Manual

11.2 DAB radio reception

> Press the MODE button as often as required until [DAB Radio] appears in the
display.
Alternatively:
> Press the MENU button and then select [Main menu > DAB].
If you are in a submenu, select the main menu as described in Section 7.1.
If DAB is being started for the first time, a complete station scan is
performed. The station list is then shown (see Section 11.4).

11.3 Performing a station scan

The automatic scan scans all DAB+ band III channels and thereby finds all stations
being broadcast within the reception area.
After the scan is complete, the first station is played back in alphanumeric
order.
> In order to perform a complete scan, press the SCAN button. "Scan" appears
in the display. The scan starts and the progress bar appears in the display.
> When completed, press  or  and OK to select a station.
> Alternatively: press the MENU button and select using  or [Scan]. Confirm
by pressing OK.
If no stations are found, check the antenna and change the installation
location if required (section6.3.1).

11.3.1 Manual scan

Proceed as follows if you want to run a station scan manually:
> Select [Menu > Set Manually] and press the OK button.
> Select a station frequency and press the OK button.
If stations are being broadcast on the selected frequency, this will be
indicated on the stability bar (see also Section 11.8). If these stations are not
currently included in your station list, they will now be stored there.

11.4 Selecting stations

> You can check the stations found on the device. To do so press  or .
> To select a station press OK.
DE
EN
FR
IT
NL
DA
PL
SK
SL
61