Set-Up Wizard - TechniSat DIGITRADIO 585 Instruction Manual

> Press the MENU button and then select [Main Menu > System Settings >
Software Update].
If you are in a submenu, select the main menu as described in Section 7.1.
> Select [Auto Update] if the DIGITRADIO 585 should search for new software
versions periodically.
> Select [Check now] if you want to check immediately whether a new
software version is available.
If a software update has been located, follow the instructions on the display.
In order to find software updates and upload them, the DIGITRADIO 585
must be connected to the Internet. Do not switch the DIGITRADIO 585 off
during the update process!

17.7 Set-up wizard

> Press the MENU button and then select [Main Menu > System Settings >
Set-up Wizard].
If you are in a submenu, select the main menu as described in Section 7.1.
When switching on for the first time, the set-up wizard starts automatically.
> As soon as [Run now] is shown on the display, select [YES].
If you select [No], the wizard closes and you need to perform the required
settings manually.
You will be taken through the settings in various steps.
> Under [Time format], select the desired display format for the time display
(Section 17.3).
> During the next step you must select via which source the time is to be
synchronised (for more information refer to Section 17.3).
If you have selected [Update from the Net], you must then enter the time
zone and summer-/wintertime.
Depending on the time and date settings, some of the network settings are now
performed.
> Select whether the WiFi connection should remain active in standby mode as
well. Press the OK button.
> Ensure that the device is within the reception range of the desired WiFi
network and that you have the access data. In some cases it may be
necessary to carry out some settings on the router. In this case, please refer
to the corresponding instruction manual.
74