Switching Off The Alarm After Being Woken; Equaliser; System Settings; Time And Date Settings - TechniSat DIGITRADIO 370 CD BT Instruction Manual

When an alarm is active, an alarm symbol appears on the display.

12.2.2 Switching off the alarm after being woken

> Press the On/Standby button on the remote control or on the device to
switch off the alarm. Press ENTER to activate the snooze function.

12.3 Equaliser

You can use the equaliser to adjust the sound according to your preferences.
> Press the MENU button and use the / buttons to select the [Audio
settings] > [Equaliser] item.
> Press the ENTER button.
Alternatively, press the EQ button (19) on the remote control.
> Use / to select an equaliser preset. Press the ENTER button to accept the
selection.

13 System settings

All settings explained in this section apply equally to all sources.
> Open the menu and use the / > [System Settings] buttons to select. Press
the ENTER button to open the system settings.

13.1 Time and date settings

13.1.1 Manually setting the date/time

Depending on the setting for time updates (Section 13.1.2), the date and time might
have to be set manually.
> Press the MENU button and select the [Date/Time] item in the [System
settings] submenu.
> Press ENTER.
Alternatively, press the CLOCK button (21) on the remote control.
> Use the / buttons to select the [Set date/time] item and press ENTER.
> The first digits (day) of the date flash and can be changed using the /
buttons.
> Press the ENTER button to apply the setting.
> The next date digits (month) then start to flash and can again be changed as
described above.
> Press the ENTER button after every additional setting in order to go to the
next setting.
72