Fig. 27 Data Memory Mapping; Fig. 28 Code And Data Memory - Beckhoff BC3150 Documentation

Parameterization and Commissioning
Fig. 27: Data memory mapping
Used code and data memory
Fig. Code and data memory (1) "Used PLC code" in %.
Fig. Code and data memory (2) "Used PLC data" in %.
Fig. Code and data memory (3) "Used PLC source" in %.
Fig. 28: Code and data memory
Other memory
Fig. Other Memory (1) "Used Near Heap" is required for the COM interface and SSB. % values.
Fig. Other Memory (2) "Used Huge Heap" is required for the ADS communication. % values. This value
should be less than 30 %.
Fig. Other Memory (3) "Used File Area" is required for the TwinCAT configuration, the TSM file and the
16 kbyte flash access. % values.
34 Version: 2.1.0 BC3150