4.2.2
Creating a TwinCAT configuration
In order to configure a Bus Terminal Controller of the BCxx50, BCxx20 or BXxx00 series, create a BX file in
the System Manager. To simplify matters, files for the basic units have already been prepared. Open the
corresponding Bus Terminal Controller with New from Template.
Fig. 16: Creating a TwinCAT configuration
Select the corresponding Bus Terminal Controller.
Fig. 17: Selecting the Bus Terminal Controller
All Bus Terminal Controller components are now available:
• Fieldbus interface
• K-bus interface [} 46]
• PLC Program [} 48]
• SSB (only Bus Terminal Controllers of the BX series)
Please refer to the relevant chapter for device configuration.
BC3150
Version: 2.1.0
Parameterization and Commissioning
29