General Operating Conditions; Fig. 89 Status Messages Relating To The Firmware Update - Beckhoff BC3150 Documentation

Appendix
Fig. 89: Status messages relating to the firmware update
8.4

General operating conditions

The following conditions must be met in order to ensure flawless operation of the fieldbus components.
Environmental conditions
Operation
The components may not be used without additional protection in the following locations:
• in difficult environments, such as where there are corrosive vapors or gases, or high dust levels
• in the presence of high levels of ionizing radiation
Condition
Permissible ambient temperature during operation
Installation position
Vibration resistance
Shock resistance
EMC immunity
Emission
Transport and storage
Condition
Permissible ambient temperature during storage
Relative humidity
Free fall
Protection classes and types
Condition
Protection class in accordance with IEC 536 (VDE
0106, Part 1)
Protection class conforms to IEC 529
Protection against foreign objects
Protection against water
98
Permissible range
see technical data
variable
conforms to EN 60068-2-6
conforms to EN 60068-2-27
conforms to EN 61000-6-2
conforms to EN 61000-6-4
Permissible range
-25°C... +85°C
95 %, no condensation
up to 1 m in the original packaging
Permissible range
A protective conductor connection to the profile rail is
necessary!
IP20 (protection against contact with a standard test
finger)
Less than 12 mm in diameter
no protection
Version: 2.1.0 BC3150