Intersecting Axis Gear - SaMASZ KDF260 Operator's Manual

Removing the worked oil from the cutterbar is done through the outlet B (fig. 20b. ) situated at the
end of the cutterbar. Always change the oil just after finished work, when it is still warm.
A
a
Fig. 20. Cutterbar oil inlet (A) and outlet (B).
Tab.3. Oil capacities.
Models
KDF260S – 2,6 m;
KDF260W – 2,6 m;
KDF300S – 3,0 m
KDF300W – 3,0 m

6.2. Intersecting axis gear

Everyday before starting work please check the oil level and, if needed, please refill after having
removed the vent A on the top of the gear (Fig. 21.). The oil level can be checked through the check
opening B on the side of the gear. Please refill the oil until it is visible in the check opening B. The
oil capacity: about 1 l.
Fig. 21. Intersecting axis gear lubrication points.
Operator's manual
Oil capacity [l]
6,5
7,0
A
B
Front disc mower
KDF260S; KDF300S;
KDF260W; KDF300W;
b
Oil type
80W90
A
18
B
Lubrication frequency
Once every 3 seasons
(if working intensively)