8. DISASSEMBLY AND WITHDRAWAL FROM USE
8.1. Disassembly
Before starting any repair or service the mower should be cleaned and any grass or dirt removed.
Carefully check nuts and bolts for correct tension and the pins for wear. Replace as necessary.
8.2. Scrapping
If the mower cannot be repaired anymore, it should be withdrawn from use
For this purpose oil from intersecting axis gear and cutterbar should be drained and delivered to a proper
waste treatment company. Clean the mower parts, dismantle and dispose properly of all plastic parts.
After that, the mower could be sold to breaker's yard.
9. WARRANTY CARD
Type of mower
KDF260S
(2,6 m)
KDF300S
(3,0 m)
KDF260W (2,6 m)
KDF300W (3,0 m)
The product quality has been checked and meets the required standards and regulations and is permitted
for use.
Operator's manual
CAUTION:
Before disassembly the mower should be disconnected from the
tractor.
FRONT DISC MOWER
Polish Id.No. KTM
Front disc mower
KDF260S; KDF300S;
KDF260W; KDF300W;
Serial number
Date of manufacture
Manufacturer's stamp
QC signature
Date of purchase
Dealer's stamp
Dealer's signature
22
.
Polish Id.No. PKWiU