SaMASZ KDF260 Operator's Manual page 7

8h
8h
Fig.3. PTO shaft. PTO shaft lubrication points.
* Overrunning left + friction
Fig. 4. Choosing PTO shaft according to tractor's PTO rpm direction (Tab. 1.) acc. to Weasler.
WET – West European Tractors
Make sure to use proper PTO shaft, because using PTO shaft without friction and overrunning
clutch makes the warranty invalid.
The mower is equipped with such elements as holders and brackets used to mount warning lights
and plates. Combined lights and reflectors are mounted on the warning plates.
Operator's manual
8h
:
CAUTION
Lubricate the PTO shaft with high quality multi-purpose grease
every 8 shaft operating hours. If access holes are available, lubricate
fittings through access holes. E-kits need lubrication every 50
hours. See decal on guard if applicable
Symbol
904-00668*
(right direction)
CAUTION:
Optional extra equipment should be ordered separately.
WET
* Overrunning right + friction.
OET – East European Tractors
( Zetor, MTS, Pronar )
6
Front disc mower
KDF260S; KDF300S;
KDF260W; KDF300W;
8h
8h
.
g
Symbol
904-00365*
(left direction).
OET