Adjusting The Space Between Tine Conditioner's Mask And Its Shaft - SaMASZ KDF260 Operator's Manual

Fig.13. Disc turns (KDF 300)
5.3.

Adjusting the space between tine conditioner's mask and its shaft.

(Models: KDF 260S ; KDF 300S)
Depending on size and thickness of the mowing grass, there may be a necessity to adjust the mask
of the conditioner. The higher and thicker grass, the bigger the space between conditioner's mask
and its shaft should be. Proper adjustment should be based on the experience, in order not to block
the conditioner and not to activate the friction clutch of PTO shaft. The way how the mask is
regulated is shown in fig. 14.
Operator's manual
CAUTION:
Before you change the knife check disc turns (fig. 12, fig.13. )
CAUTION:
Different mounting of the knives will block the mower. When
mounting pay particular attention to loose rotation of the knife on
the knife holder pin.
CAUTION:
Because of high discs rpm, knife holders should be changed in
sets of the same weight – on every holder there is its weight
written. Improperly changed knife holders will damage disc
bearings.
+ + + +
- - - -
14
Front disc mower
KDF260S; KDF300S;
KDF260W; KDF300W;