Tab.4. Oil capacity.
Model
Oil capacity [l]
All models
CAUTION!
The above instructions should be strictly followed. If the discs in the
cutterbar rotate loosely, do not worry about the high intersecting axis gear
temperature; after long working time it may reach even 60-80
6.3. Roller conditioner's gearbox
Everyday before starting work please check the oil level and, if needed, please refill after having
removed the vent A on the top of the gearbox A (fig. 22.). The oil level can be checked through the
check opening B on the side of the gear. Please refill the oil until it is visible in the check opening
B. The oil level: about 0,5 l. Check oil level when the cutterbar is on the ground. Removing the
worked oil from the gearbox is done through the outlet C.
Tab. 6. Oil capacities.
Oil capacity
Model
All models
Fig. 22. Roller conditioner's gearbox lubrication points.
Operator's manual
Transol 680 1000
(acc. to ISO 3448 oil viscosity grade :
About 1l
Oil type
[l]
0,5
80W90
Oil type
VG-680 – 1000 )
A
B
C
19
Front disc mower
KDF260S; KDF300S;
KDF260W; KDF300W;
Lubrication frequency
Once every 3 seasons
(if working intensively)
o
.
C
Lubrication frequency
Once every 3 seasons
(if working intensively)