UPS5000-S-1600 kVA
User Manual
Figure 3-66 Installing the cable of the fan unit
(1) When installing the N cable on the right of the fan unit, route the cable from the rear of
the input circuit breaker copper bar, through the PVC cable hole, and then connect the
cable to the N bar.
Step 2 Install the mounting plate.
Figure 3-67 Installing the mounting plate
(1) Mounting plate
(numbered 13)
(5) Bypass unit
mounting plate
(9) Fan unit – right
mounting plate
Issue 04 (2020-03-03)
(2) Fan unit – left
mounting plate
(6) Input/Output unit 1
mounting plate
(10) Right mounting
plate
Copyright © Huawei Technologies Co., Ltd.
(3) Power unit 1
mounting plate
(7) Input/Output unit 2
mounting plate
3 Installation
(4) Power unit 2
mounting plate
(8) Power unit 3
mounting plate
90