Table of Contents
Advertisement
UPS5000-S-1600 kVA
User Manual
Table 4-9 Bypass input
Item
Phase voltage (V)
Line voltage (V)
Phase current (A)
Frequency (Hz)
Power factor
Table 4-10 Power Unit N Batt.
Item
Battery status
Voltage (V)
Current (A)
Temperature (° C)
Backup time (min)
Remaining cap. (%)
SOH
Table 4-11 Total runtime
Item
Bypass runtime (h)
Inv. runtime (h)
Issue 04 (2020-03-03)
The Power Cabinet N data in the system running is the same as the Battery Info data in the power unit
running.
The value must be an integer. For example:
If the value is less than 1, the value takes 0.
If the value is greater than or equal to 1 and less than 2, the value takes 1.
Copyright © Huawei Technologies Co., Ltd.
Description
Bypass input phase voltage
Bypass input line voltage
Bypass input phase current
Bypass input frequency
Proportion of the bypass input active power to the bypass
input apparent power.
Description
Battery status, which can be Not connected, Equalized
charging, Float charging, Hibernating, discharging, or
Not chg. or dis.
Voltage of the battery string
Current of the battery string. The current is + when
batteries are being charged and - when discharged.
N/A
Battery backup time estimated at the current load
Remaining battery capacity
State of health
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
4 User Interface
106
Advertisement
Table of Contents
