Help - Oricom CARE95 User Manual

Help

18
Help
No dial tone
- Check that the telephone line cord is plugged into the phone socket on the base and plugged
into the telephone line socket at the wall, see page 6.
- Only use the telephone line cord supplied with the phone.
Phone does not ring
- Check that the Ringer volume is not set too low or Off, see page 11.
- You may have too many phones, fax machines and/or answering machines plugged in that may
be overloading the sockets, see 'Technical information' on page 22.
*Need some help? Call 02 4574 8888 or go to www.oricom.com.au