Additional Digitizing Information - Brother PRCF5 User Manual

Additional digitizing
information
When creating a pattern for embroidering with the
cap frame, pay attention to the following points in
order to avoid registration problems (misalignment
or gaps in the pattern).
1 Sew underlay stitches.
2 Start from the center of the embroidery
pattern and sew toward the ends.
With this machine, the order in which
patterns are selected when they are
combined is the order in which they will be
sewn. For the following example, select the
patterns in the order "E" → "A" → "B" → "R"
to make the combined pattern "BEAR".
Incorrect
sewing
order
Correct
sewing
order
Note
● Do not sew from one end to the other,
otherwise wrinkling or shrinkage may
occur.
3 When sewing outlines of patterns, make sure
that the stitch width of the satin stitching is
at least 2 mm, and that the stitching overlaps
the fabric by at least 1 mm. Also, make sure
that there are no long jumps stitches in the
outlining of each region or letter.
1 At least 1 mm
2 At least 2 mm
CAUTION
●
Do not sew more than four
overlapping layers.
1 Specify that overlapping areas
15/15
are not sewn.