System Menu; Display Counter - Xerox QLS-8100XE Operation & Setup Manual

System Menu

System options are accessed via the System menu. The following sections
detail each of the features within this menu category.

Display Counter

The printer can dynamically display either the ongoing total number of
labels that have been printed since the printer was last powered up or the
number of labels that have been printed within any specific batch or print
job. The printer's label counting feature can also be turned off.
To set up the counter:
1 If the printer is in a Ready state, proceed to the next step.
If the printer is in a Pause state, press the NEXT or PREVIOUS key until
the System menu is displayed. Then press the SELECT key.
Pause: System
2 Press the NEXT or PREVIOUS key until the Display Cntrs menu is
displayed.
3 Press the + or – key until the desired counter setting is displayed. The
following options are available.
Off – No counter is displayed.
Total – Count of labels printed since last power on is displayed
Batch – Count of labels printed in current batch is displayed
The selected counter mode will now appear on the display while
printing.
QLS-8100 Xe
Press SELECT
Display Cntr
Off
4-43