Table of Contents
Advertisement
7
If print quality is not satisfactory, allow the test pattern to continue to
print and press the NEXT or PREVIOUS key to access any of the
parameters that can be adjusted while operating in the test print mode.
The print adjustment parameters that can be changed are:
•
Intensity for each printhead
•
Speed
•
Print line adjustment
•
Cross web adjustment
•
Vertical offset
•
Horizontal offset
8
As each parameter is displayed, press the + or - key to adjust the selected
setting.
9
As you change the parameter settings, examine the test pattern to ensure
that the changes you are making are improving print quality.
10 Continue to adjust the parameter settings until you are satisfied that
print quality has been optimized.
5-14
Operation
- Quick Links:
- Printhead Replacement
Hide quick links:
Advertisement
Table of Contents
