Chapter 5: Operation - Xerox QLS-8100XE Operation & Setup Manual

Chapter 5:
Operation
To prepare the QLS-8100 Xe for printing, make sure that:
•
Water cooling system has been connected
•
Power connection has been made
•
Communication connections have been made between host and printer
•
Compressed air is supplied to the printer if RibbonRation™ will be used
•
Media and Thermal Transfer Ribbon has been loaded into the printer
•
You have installed a software application from which you will print
•
You have installed the QLS Windows Printer Driver (as needed)
Once you have completed and verified the above, you are ready to begin
printing with your QLS-8100 Xe.
This chapter provides the following information:
•
Information on printing with the QLS-8100 Xe
•
Descriptions of print indicators
•
Descriptions of error messages
•
Information on color alignment and adjustments
•
Information on evaluating print quality
•
Instructions for enabling/disabling RibbonRation™
•
Instructions for printing labels
QLS-8100 Xe 5-1