Xerox QLS-8100XE Operation & Setup Manual page 176

QLS-8100 Xe Format Error Codes
1 Field X location error
The X coordinate of a Set Field Location command (<STX>FLx,y) is
out of bounds.
2 Field Y location error
The Y coordinate of a Set Field Location command (<STX>FLx,y) is
out of bounds.
3 Alphanumeric field font error
The font parameter of a Define Alphanumeric Field Font command
(<STX>AFfont,r,w,h,m) is invalid.
4 Alphanumeric rotation error
Valid rotations are 0, 90, 180, 270°.
5 Alphanumeric character height error
Valid settings for font height are 10 to 2000 for TrueType® fonts and
1 to 10 for bitmap fonts.
6 Alphanumeric character width error
The range for width values is the same as for height values.
7 Bar-code field type error
The barcode type value of a Define Bar-code Symbol command
(<STX>BFtype,r,....) is out of bounds.
8 Bar-code field rotation error
Valid rotations are 0, 90, 180, 270°.
9 Bar-code height error
Bar-code height is out of bounds.
10 Bar-code narrow element error
The narrow element value in a Define Bar-code Symbol command is
out of range.
11 Bar-code wide element error
The wide element value in a Define Bar-code Symbol command is
out of range.
12 Bar-code interpretation error
The selection for enabling bar-code text interpretation is faulty.
F-2 Format error codes