Xerox QLS-8100XE Operation & Setup Manual page 51

Label Reprint
Cal & Setup Menu
Calibrate
Test Print
Vertical Baseline
Horizontal Baseline
Printer Settings
Operation Menu
Pull Back
Label Reprint
Synchronize Labels
QLS-8100 Xe
Reprints up to 999 copies of the last label printed, if
using the Windows print driver. (Available only
from Ready state)
Options are available in a Pause state only.
Calibrates the printer to media type. Possible
values are Gap, Reflective, or Continuous.
Prints test patterns. Possible values are:
Test Pattern 2", 4", 6", 7", 8"
Block Pattern (All)
Proc. Block (CMYK)
Proc. Block (KCMY)
Horiz. Line Pattern
Large Blocks 2", 4", 6", 7", 8"
Synchronizes the vertical registration across
multiple QLS-8100 Xe printers. Possible values
range from -120 to +120 dots.
Synchronizes the horizontal registration across
multiple QLS-8100 Xe printers. Possible values
range from <-120 to -> 120 dots.
Prints all of the current settings for the printer.
Options are available in a Pause state only.
Requires special hardware. Contact QuickLabel
Systems for more information on this function.
Reprints up to 999 copies of the last label printed, if
using the Windows print driver.
Synchronizes labels when using printer/applicator.
4-5