Xerox QLS-8100XE Operation & Setup Manual page 112

Deletes all labels
SELECT to confirm
•
Displayed when the CANCEL key is pressed while a batch is being
printed. Pressing the SELECT key will cancel all pending labels in the
batch.
NVRAM Test Failed
Please reset printer
•
Displayed during the printer power-up sequence if the non-volatile
RAM test fails. Powering off the printer, and then powering it back on
may resolve the issue. If this does not resolve the issue, contact
QuickLabel Systems Technical Support.
Detected On Head x
•
Displayed if non-QuickLabel Systems Thermal Transfer Ribbon is
loaded. The printer will not print if invalid ribbon is used. Replace the
invalid ribbon with Genuine QuickLabel Systems Ribbon to restore
printing functionality. Contact QuickLabel Systems to purchase ribbon.
5-8
Invalid Ribbon
Operation