Xerox QLS-8100XE Operation & Setup Manual page 53

System Menu
Display Cntr
Memory Card
Format Memory Card
Front Panel
Lock/Unlock
Time
Date
Factory Reset
Options Menu
Mirror Mode
Cutter
Cut Flag
Pull Back
Applicator
QLS-8100 Xe
Options are available in a Pause state only.
Adjusts the display of the label counter. Possible
values are Off, Batch, or Total.
Selects whether to write-protect the memory card.
Possible values are Write Protect ON or Write
Protect OFF.
Formats the memory card.
Locks/Unlocks the front panel with a password.
Sets up the time on the built-in, real-time clock.
Sets up the date on the built-in, real-time clock.
Returns the printer settings to the factory defaults.
Options are available in a Pause state only.
Activates mirror mode. Possible values are ON or
OFF.
Activates the cutter accessory. Possible values are
Enabled or Disabled.
Activates the cut flag. Possible values are ON or
OFF. This option is available only if the cutter is
enabled.
Enables/disables the pull back function. Possible
values are Enabled or Disabled. This option
requires special hardware. Contact QuickLabel
Systems for more information.
Activates the label applicator mode. Possible
values are Enabled or Disabled.
4-7