Recommended Tool List - Xerox QLS-8100XE Operation & Setup Manual

Recommended Tool List

The following is a list of recommended tools for maintenance and repair of
the QLS-8100 Xe.
3/16" X 4" long Slotted Screwdriver
3/32" X 4" long Slotted Screwdriver
#2 1/4" X 15/16" Phillips Screwdriver
#2 1/4" X 8" Phillips Screwdriver
#1 3/16" X 3" Phillips Screwdriver
Nut Driver Set containing 1/4", 3/16", 5/16", 3/8", and 11/32"
Ball End Allen Wrench Set containing .050", 1/16", 3/32", 5/64", and 7/64"
Open End Wrenches containing 1/4", 3/8", 5/16", and 7/16"
1/4" Drive Ratchet and Socket Set containing 3/8" and 7/16" sockets
Flat Nose Pliers
Slip Joint Pliers
Snap Ring Pliers
Volt-Ohm Meter
Millimeter Scale
7-2 Maintenance and repair