Vertical Baseline - Xerox QLS-8100XE Operation & Setup Manual

Quicklabel systems thermal transfer printer operation & setup guide
Table of Contents

Advertisement

Vertical Baseline

This function is used to synchronize printing when using multiple
QLS-8100 Xe printers. If you are sending the same image file to two or more
printers and notice that the image prints in different vertical locations, you
can use this function to move the vertical baseline of a printer.
To adjust the vertical baseline:
1
If the printer is in a Ready state, press the PRINT/PAUSE key to pause
the printer.
2
Press the NEXT or PREVIOUS key until the Cal & Setup menu is
displayed. Then press the SELECT key.
Pause: Cal & Setup
Press SELECT
3
Press the NEXT or PREVIOUS key until the Vertical Baseline menu is
displayed.
4
Press the + or – key until the desired baseline setting is displayed.
Baseline settings range from -120 through +120 dots.
5
Press the SELECT key to confirm the baseline.
6
Repeat this process on each printer requiring a baseline adjustment.
QLS-8100 Xe
Vertical Baseline
Baseline = +0
6-7

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Xerox QLS-8100XE

Table of Contents