Label Reprint - Xerox QLS-8100XE Operation & Setup Manual

Label Reprint

When using the QuickLabel Systems Printer Driver for Windows to print to
the QLS-8100 Xe, data is transmitted from the PC software application to the
printer as a bitmapped image. You can use the Reprint option to quickly
print any quantity of the last label printed.
To reprint labels:
1 If the printer is in a Ready state, proceed to the next step.
If the printer is in a Pause state, press the NEXT or PREVIOUS key until
the Operation menu is displayed. Then press the SELECT key.
Pause: Operation
2 Press the NEXT or PREVIOUS key until the Label Reprint menu is
displayed.
3 Press the + or – key to specify the number of the last labels you wish to
reprint. You can reprint up to 999 copies.
4 Press the SELECT key. The quantity you specified will be printed.
QLS-8100 Xe
Press SELECT
Label Reprint
Copies = 1
4-29