Table of Contents
Advertisement
Using the PCL Driver
Document Options
3-12
User Guide
Output
Allows you to set your printer's paper output destination.
The options are:
• The Standard Bin, which holds up to 500 sheets.
• The optional offset catch tray, which holds up to 500
sheets of standard paper with offset capability.
Use this feature (available only when the optional
Offset Catch Tray is installed) to offset the output of
successive jobs (or sets within a multiple set job) from
each other. For more information on offsetting output,
see the section "Offsetting Output" (page 3-58).
When you select this tab, you can set the finishing mode
and margins.
Finishing Mode
There are two finishing modes:
• Multiple Pages per Side (N-Up printing)
By default, the printer will print one page image on the
sheet of paper. You can select two, four, six, nine or
sixteen page images per side of paper. The printer will
shrink the page images as needed and will arrange
them on the paper most appropriately for the paper
size and orientation.
You can also choose to print black borders around each
page. The default is to not print borders.
Advertisement
Table of Contents
Troubleshooting
