Control Panel Message
Insert MBF
Manual Feed
Close Covers
Corrective Action
8
Reinsert the multi bypass feeder
tray.
If it was extended, hold both
sides where indicated and push it
straight back until it stops.
9
Reload the multi bypass feeder.
10
Close the top cover.
11
Check the Control Panel display.
If the jam has been cleared and
all covers are closed, the Control
Panel will display
or Ready. If a paper jam message
remains, there is still paper
jammed in the printer. Refer to
Table 5.1 on page 5-6 for
instructions.
Chapter 5: Troubleshooting
Paper Jams
Processing
5-25