Xerox N2025/N2825 User Manual page 88

Using the Control Panel
Table 3.5 Control Panel Menu Options (continued)
Menu
Tray Menu Allows you to access tray settings for PCL and PostScript jobs:
MBF Size
MBF Type
Tray N Type
Tray Sequence
Custom Size
Tray N Mode
Config Fuser
3-42 User Guide
Description and Items
Defines the paper size that is loaded in the multi bypass
feeder.
Defines the paper type that is loaded in the multi bypass
feeder.
Defines the type of paper installed in Tray N (where N is the
tray number—Tray 1, 2, or 3).
Defines the order in which trays are used when more than
one tray meets the size and type requirements.
Defines the paper size that is to be used for formatting
custom paper when a Tray Mode is set to Custom.
Determines whether or not the tray's auto size detection
mechanism is overridden by custom size settings (where N is
the tray number—Tray 1, 2, or 3).
Enables the setting of fuser temperatures associated with
each paper type. If set to On, paper types are available as a
menu item.
Table 3.5 Page 2 of 14