Deleting A Password Job - Xerox N2025/N2825 User Manual

Using the Control Panel
Deleting a
Password Job
3-56 User Guide
To delete a password print job sent to the printer and
stored in the optional hard drive, follow these steps:
1 At the Control Panel, press Menu Up or Menu Down
until you see:
Menus
Password Menu
2 Press Item Up or Item Down and you will see:
Enter password
_xxx
3 Enter your job's numeric password and you will see:
All Jobs
Print
4 Press Value Up or Value Down and you will see:
All Jobs
Delete
5 Press Enter to delete all jobs.
OR:
Press Item Up or Item Down to scroll through the jobs,
until the job you wish to delete is shown. If Print shows
on the bottom line, press Value Up or Value Down to
show Delete instead. Then press Enter. Repeat this step as
necessary to delete more than one job.
6 When done, press On Line.
=
=