Xerox N2025/N2825 User Manual page 95

Table 3.5 Control Panel Menu Options (continued)
Menu
Ethernet Menu ETalk Enable
(continued)
HTTP Enable
IP Address Res
IP Address
Sub Net Mask
Default Gateway
Port Timeout
Speed
Description and Items
Enables or disables the Ethernet EtherTalk protocol.
Enables or disables the Ethernet HTTP Server protocol.
Sets the method used to resolve (Res) the IP address,
including subnet mask and default gateway.
Sets the four byte IP address. This item appears only if the IP
Address Res is set to static.
Sets the four byte Sub Net Mask address. This item appears
only if the IP Address Res is set to static.
Sets the four byte Default Gateway address. This item
appears only if the IP Address Res is set to static.
Sets the time for determining when to end an incomplete
print job and poll the next port in the polling sequence.
Sets the speed of the 10/100 Ethernet interface and whether
half or full duplex Ethernet.
Using the Control Panel
Table 3.5 Page 9 of 14
Chapter 3: Printing 3-49