Xerox DocuPrint NC60 User Manual page 77

• Send EOF (CTRL+D) Before/After Job
The Send EOF Before/After options direct the printer
driver to send the "CTRL+D" character before/after
each PostScript job. This character resets the system for
the next job.
If your driver provides a "Send EOF After Job" setting,
it should always be selected when printing to a
DocuPrint NC60 via a direct parallel port connection.
If this setting is not selected, the system may not be
able to separate individual jobs that are sent to it via
the parallel port.
• Display Alert for Incompatible Applications
Select this option to display an alert message when
driver features (such as N-up, Watermarks, Negative
Image, Mirror Image, or Scaling) are incompatible with
the application you are using. You can choose among
these options:
— Attempt to print the document using the current
driver settings, despite incompatibilities.
— Turn off the current driver settings for this print job
only and proceed with printing.
— Cancel the print job.
PostScript Printer Driver Features
Chapter 3: Printing 3-25