How To Attach The Manual Bypass Feeder Tray - Xerox DocuPrint NC60 User Manual

How to Attach the
Manual Bypass
Feeder Tray
To attach the Manual Bypass Feeder Tray to the front of
the printer:
1 Orient the tray so that the edge with the two small tabs
and the support arms is facing the printer.
Align the tabs on the edge of the tray with the
2
indentations just inside of the Manual Bypass Feeder Slot,
and insert the edge of the tray into the slot.
3 Press gently on the top of the tray above the tabs until the
tabs fit securely into the indentations.
4 Rest the support arms against the front of the printer.
Chapter 2: Loading Print Media
The Manual Bypass Feeder Slot
2-11