Memory Installation Procedure - Xerox DocuPrint NC60 User Manual

Memory Installation
Procedure
Each Memory Upgrade Kit contains one memory SIMM.
1 Switch the printer off.
2 Loosen the screws on the rear of the printer that hold the
pullout panel in place.
Pull the panel out of the printer, and place it flat-side
3
down on a level surface.
4 Use your index finger and thumb to grasp one end of the
SIMM, and remove it from the envelope. Align the SIMM
with the slot that you will install it in.
How to Install Additional Memory
Appendix C: Printer Options C-7