Covers - Xerox DocuPrint NC60 User Manual

Printer Components

Covers

1-12 DocuPrint NC60 User Guide
The DocuPrint NC60 has three covers, which are
identified in Figure 1.1 on page 1-9. Use the following
instructions to open each cover and gain access to the
internal components of your printer.
To Open the Front Cover:
1 Simultaneously grasp the two latches, located on the front
cover, and pull up to release them.
Do not attempt to open the Front Cover if the
paper tray is partially removed. Permanent
damage will occur.
Gently pull the cover up and toward you until it rests in a
2
lowered position.
Do not leave the covers open for an extended period of
time. Prolonged exposure to light will damage the print
drum.