Xerox DocuPrint NC60 User Manual page 124

Using the Optional Media Server
3-72 DocuPrint NC60 User Guide
To print from the Media Server:
1 Create a PostScript or PCL 5C printer file. (You cannot
print an application file at the Media Server. You must use
the Print to File utility.) Save the printer file you created
on a standard High Density, 3.5-inch, MS DOS formatted
disk.
Insert the disk into the Media Server's disk drive as shown
2
in Figure 3.3 on page 3-71.
3 Press Menu Up or Menu Down until you see:
Menus
Media Server Menu
4 Press Item Up or Item Down until you see:
Media Server Menu
Select File
Press Value Up or Value Down until you see:
5
Select File
Filename
6 Press Enter when the file shown on the display window is
the file you want to print.