Xerox DocuPrint NC60 User Manual page 43

To load the tray with paper:
1 Grasp the handle of the tray, and completely remove it
from the printer.
Do not attempt to load paper into a partially
removed tray, as this may bend the paper tabs on
the tray and lead to paper jams.
2 Adjust the side and back edge guides to accommodate the
paper to be loaded. To adjust the back edge guide,
carefully pull the guide as shown, place it into the holes
indicated for the size desired, and then gently press the
guide securely into the holes.
3 Press down on the metal pressure plate until it is flat
against the bottom of the tray.
Chapter 2: Loading Print Media
Loading the Media Tray
2-5