Table of Contents
Advertisement
Chapter 1: Introduction
Avoid exposing the T20 pendant to mechanical vibrations, excessive dust, humidity, or
l
strong magnetic fields.
Never clean the T20 pendant display screen or other surfaces with solvents, abrasive
l
cleaners, or scrubbing sponges.
Make sure that no foreign objects or liquids can penetrate into the T20 pendant.
l
1.3 How Can I Get Help?
Refer to the corporate website:
http://www.ia.omron.com
Related Manuals
This guide covers the installation, operation, and maintenance of the T20 pendant. There are
additional manuals that cover programming the system, reconfiguring installed components,
and adding other optional components. See the table that follows. These manuals are also
available on the software disk shipped with each robot system.
Manual Title
Robot Safety Guide
SmartController EX
User's Guide
ACE User's Guide
eV+ Language User's
Guide
WARNING: When the cable entrance cover is removed, the T20
pendant is sensitive to electrostatic discharge.
Table 1-1. Related Manuals
Contains safety information for our robots.
Contains complete information on the installation
and operation of the SmartController EX motion con-
troller and the optional sDIO product.
Describes the ACE software environment and use
with a control system. This documentation is
included in the ACE software installation.
Describes the eV+ language and programming of a
control system.
T20 Pendant User's Guide, 10433-000 Rev. E
Page 6 of 50
Description
Advertisement
Table of Contents
