Touch-Tone Enable; Ring Option Override - AT&T MERLIN 1030 Attendant's Manual

TOUCH-TONE ENABLE

To Program: T/P to P Touch the button
center
If your system has lines that carry rotary signals, you can program a but-
ton that allows you to switch to Touch-Tone signals to use services such
as an alternate long distance service or credit card authorizations.
Lift your handset.
Dial the first part of the number.
You hear rotary clicks.
Touch the appropriate Shift button (large console only).
Touch Touch-Tone Enable.
Dial remaining numbers.
You hear Touch-Tone signals.
You turn off the Touch-Tone Enable feature when you hang up your
handset.

RING OPTION OVERRIDE

T/P to P Touch the button
To Program:
center
You may have to answer calls when everyone in your business is out to
lunch or in a meeting. The Ring Option Override feature allows all the lines
that appear on your console to ring immediately, regardless of whether
they are programmed to ring after a delay or not at all.
To have all calls ring immediately at your console:
Touch the appropriate Shift button (large console only).
Touch Ring Option Override.
The green light next to the button comes on.
To return to your programmed line ringing:
Touch the appropriate Shift button (large console only).
Touch Ring Option Override.
The green light next to the button goes off.
Dial * 76 T/P to
Dial * 78 T/P to
10-20-30
+ +
outside
large console only
number
+
Touch-Tone
Enable
outside
number
10-20-30
+
Ring Option
Override
large console only
10-20-30
Ring Option
+
Override
large console only
+
31