Answering While On A Call-The Hold Feature - AT&T MERLIN 1030 Attendant's Manual

ANSWERING WHILE ON A CALL—THE HOLD FEATURE
When you are busy on one line, another call may come in on that line or
on another line.
To answer a second call that comes in on another line:
Touch Hold.
The green light next to the held call's line button flashes rapidly.
Touch the line button where the second call is ringing.
The flashing green light next to that line button becomes steady.
lMPORTANT: If you touch the line button where the second call is
ringing before you touch Hold, you disconnect the original call.
To return to the original call:
Touch the line button next to the rapidly flashing green light.
Calls that other people in your system put on hold show on your console,
too, but the green lights next to these line buttons flash more slowly than
they do for calls you put on hold.
To answer a second call when you hear a Call Waiting signal on the line
you are using:
Refer to your PBX/Centrex user's guide for instructions.
IMPORTANT: If your PBX/Centrex requires you to press the switchhook
to put a call on hold, touch Recall instead.
Hold
555-1234
+
Pause
555-1234
11