Personalized Ringing; Manual Signaling - AT&T MERLIN 1030 Attendant's Manual

To place or answer a call using the Headset Adapter:
Press On without lifting your handset.
Speak into the microphone.
Press Off to end the call.
To speak with someone in your office while you're on another call:
Hold down the Quiet button to mute the microphone.
Release Quiet to resume your call.

PERSONALIZED RINGING

If your console's ringing is easily confused with the ringing of other near-
by consoles or voice terminals, you can choose another ringing pattern
from eight different ringing options. If you personalize your ring, you can
still distinguish the ringing of different types of calls such as intercom calls
and PBX/Centrex calls.
To program Personalized Ringing:
Slide the T/P switch to the P position.
You hear the ringing sound that your console makes when you receive an out-
side call.
Touch Speaker.
The ringing sound changes.
Touch Speaker repeatedly until you hear a ringing sound you like.
Slide the T/P switch to the center position.

MANUAL SIGNALING

T/P to P Touch the button Dial * 6 + intercom
To Program:
number T/P to center
Use this feature to generate a beep at a co-worker's voice terminal. Assign
a Manual Signaling button to each person you want to be able to signal.
To signal a co-worker with a beep:
Without lifting your handset, touch a Manual Signaling button.
Label a Manual Signaling button in a way that distinguishes it from your
Auto Intercom button for the same person. The green light next to the but-
ton goes on when your co-worker is using his or her voice terminal.
Signal Mary
27