Touch-Tone Enable - AT&T Merlin 1030 User Manual

TOUCH-TONE ENABLE

(Only for systems with rotary lines)
If you have telephone lines that carry rotary signals, you can use
the Touch-Tone Enable feature to switch to Touch-Tone signals
midway through a dialing sequence. This lets you take advan-
tage of bank-by-phone, credit card authorization, and alternate
long distance services.
To program: T/P to P Touch the button Dial * 76
T/P to center
To switch from rotary pulse to Touch-Tone signals as you dial a
number:
Lift your handset.
Dial the first part of the number.
Touch Touch-Tone Enable.
Dial the remaining numbers.
The Touch-Tone Enable feature turns off when you hang up your
handset or touch Recall.
+
Touch-Tone
+
Enable
+
38