Advertisement
Cleaning & Maintenance
Remove the plug from the wall socket and let the Donut Maker cool down completely.
•
Make sure the appliance has cooled down completely before cleaning the non-stick Donut Mold
•
Plates.
Thoroughly clean the appliance after every use.
•
Do not clean the Donut Mold Plates with metal kitchen utensils or abrasive cleaning materials, as they
•
may damage the non-stick coating.
Wipe the outside of the Donut Maker with a moist, soft cloth.
•
Alternatively, the Donut Mold Plates can be cleaned with hot water, dish soap, and a non-abrasive
•
sponge.
Clean the Donut Mold Plates with a soft cleaning brush to remove any batter residue.
•
Make sure that the appliance is unplugged and all parts are clean and dry before storing.
•
∙ 18 ∙
PROBLEM
POSSIBLE CAUSE
The Donut Maker does not
The appliance is not plugged in. Plug the Donut Maker
turn on.
The batter is not done after
The batter is clumpy or too
the recommended time.
dense.
The plastic bag method of
You are using the incorrect size
putting batter onto the Donut
bag.
Mold Plate is not working.
Batter is cooked unevenly in the
Various batters need different
Donut Maker.
amounts of exposure to heat.
Batter is being cooked
improperly.
troubleshooting
SOLUTION
a grounded wall socket.
Allow an additional few minutes
of cooking.
Ensure that you are using a
1-gallon freezer-size bag.
Make sure nothing is stuck to the
Donut Mold Plates that may be
blocking the heat from reaching
the batter.
To properly cook the batter in
the recipe guide, bake on one
side for 1 ½ minutes. Then, using
a toothpick, flip donuts and bake
for another 4 minutes.
∙ 19 ∙
Hide quick links:
Advertisement
