Download Print this page

Cleaning & Maintenance; Troubleshooting - Dash DDM007 Instruction Manual

Express mini donut maker

Advertisement

Cleaning & Maintenance
Remove the plug from the wall socket and let the Donut Maker cool
completely prior to moving or cleaning.
Once cool, thoroughly clean the appliance after every use.
The Mini Donut Maker is NOT dishwasher safe and should never be
submerged in water; it must be handwashed.
Do not clean the cooking surfaces with metal kitchen utensils or abrasive
cleaning materials as they may damage the nonstick coating.
To clean, wipe the outside of the Donut Maker with a moist, soft cloth.
To clean the cooking surfaces, use hot water, dish soap, and a non-abrasive
sponge or cloth.
If there is any remaining batter residue on the cooking surfaces, use a soft
cleaning brush.
Enure that the appliance is unplugged and all parts are clean and
dry before storing.
∙ 16 ∙
PROBLEM
POSSIBLE CAUSE
The Donut Maker does not
The appliance is not
turn on.
plugged in.
The batter is not done
The batter is clumpy or
after the recommended
too dense.
time.
The plastic bag method of
putting batter onto
A larger plastic bag will be
the Donut Mold Plate is
more efficient.
not working.
Various batters need
different amounts of
exposure to heat.
Batter is cooked unevenly in
the Donut Maker.
Batter is being cooked
improperly.
Something may be stuck
The Cover Lid won't close.
between the handle and
the Donut Mold Plates.
The nonstick coating
The Donut Maker's
may be blocked by dried
nonstick coating does
grease or crust from a
not work.
previous donut.

troubleshooting

SOLUTION
Plug the Donut Maker
a grounded wall socket.
Allow an additional few minutes of
cooking.
Use a 1-gallon freezer-size bag.
Make sure nothing is stuck to the Donut
Mold Plates that may be blocking the heat
from reaching the batter.
To properly cook the batter in the
recipe guide, bake on one side for 1½
minutes. Then, using a toothpick, flip
donuts and bake for another 4 minutes.
Remove item that is stuck between
handle and Donut Mold Plate and clean
any impacted surface.
Wipe the nonstick Donut
Mold Plates with a soft, moist towel or
another non-abrasive cleaning utensil.
∙ 17 ∙

Advertisement

loading